HCI right center cover and right rear cover
Before proceeding, remove the following assemblies:
●
HCI right tray. See
HCI right tray on page 264.
●
HCI right door. See
HCI right door on page 271.
●
HCI right front cover. See
HCI right front cover on page 273.
Remove the HCI right center cover and right rear cover
1. Remove one screw (callout 1), and then remove the right rear cover (callout 2) and the right center
cover (callout 3) together.
Figure 1-371 Remove the HCI right center cover and right rear cover (1 of 2)
3 2
1
274 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...