Image-formation system
The DC controller controls the image-formation system according to commands from the formatter. The
DC controller controls the internal components of the image-formation system to form the toner image
on the photosensitive drum surface. The toner image is transferred to the print media and fused.
The following are the main components of the image-formation system:
●
Print cartridge
●
Transfer roller
●
Fuser
●
Laser/scanner assembly
●
Engine power supply
Figure 1-7 Image-formation system (1 of 2)
Engine power supply
DC controller
Laser scanner ass’y
Cartridge
Transfer roller
Fuser
The DC controller rotates the drum motor to drive the following components:
●
Photosensitive drum
●
Developing roller
ENWW
Image-formation system
19
To Next Page
Loading...
