●
Primary charging roller (follows the photosensitive drum)
●
Transfer roller (follows the photosensitive drum)
The DC controller rotates the fuser motor to drive the following components:
●
Pressure roller
●
Fuser sleeve (follows the pressure roller)
Figure 1-8 Image-formation system (2 of 2)
DC controller
Developing roller
Primary charging roller
Cartridge
Transfer roller
Drum motor
Photosensitive
drum
Fuser
Pressure roller
Fuser sleeve
Fuser motor
20 Chapter 1 Theory of operation ENWW
To Next Page
Loading...
