2. Open the scanner lid.
3. Clean the scanner glass, the document feeder
s
trips, and the white plastic backing with a soft
cloth or sponge that has been moistened with
nonabrasive glass cleaner.
CAUTION: Do not use abrasives, acetone,
benzene, ammonia, eth
yl alcohol, or carbon
tetrachloride on any part of the printer; these can
damage the printer. Do not place liquids directly
on the glass or platen. They might seep and
damage the printer.
NOTE: If you are having trouble with streaks on
copie
s when you are using the document feeder,
be sure to clean the small strip of glass on the left
side of the scanner.
4. Dry the glass and white plastic parts with a
ch
amois or a cellulose sponge to prevent
spotting.
5. Connect the power cable to an outlet, and then
pr
ess the power button to turn the printer on.
Check the resolution settings
NOTE: Setting the resolution to a high value increases the le size and the scan time.
Follow these steps to adjust the resolution setting:
1. From the Home screen on the printer control panel, scroll to and touch the Administration button.
2. Open the Scan/Digital Send Settings menu.
3. Select the category of scan and send settings that you want to congure.
4. Open the Default Job Options menu.
5. Touch the
Resolution button.
ENWW Improve scan image quality 183
To Next Page
Loading...