Tray 1
Tray capacity and paper orientation
To prevent jams, do not overfill trays. Be sure the top of the stack is below the tray-full indicator. For
short/narrow and heavy/glossy paper, load paper to less than half of the tray-full indicators.
Table 3-3 Tray 1 capacity
Paper type Specifications Quantity
Paper Range:
60 g/m
2
(16 lb) to 199g/m
2
(53 lb)
Maximum stack height: 13 mm (0.5 in)
Up to 100 sheets of 60 to 120 g/m
2
(16 to
32 lb)
Fewer than 100 sheets of (120 to 199 g/m
2
)
(32 to 53 lb) paper
Envelopes
75 g/m
2
(20 lb) to 90 g/m
2
(24 lb)
Up to 10 envelopes
Labels up to 0.23 mm (9 mils) thick Maximum stack height: 13 mm (0.5 in)
Transparencies 0.10 to 0.13 mm (4 to 5 mils) thick Maximum stack height: 13 mm (0.5 in)
Table 3-4 Tray 1 paper orientation
Single-sided printing Manual duplex printing and
Alternative Letterhead Mode
Envelopes
Face-up
Top edge leading into the product
Face-down
Long edge leading into the product, top
edge at the front of the product
Face-up
Short, postage end leading into the product
ENWW
Tray 1
35
To Next Page
Loading...
