Tray 2 and Tray 3
Tray capacity and paper orientation
To prevent jams, do not overfill trays. Be sure the top of the stack is below the tray-full indicator. For
short/narrow and heavy/glossy paper, load paper to less than half of the tray-full indicators.
Table 3-5 Tray 2 and Tray 3 capacity
Paper type Specifications Quantity
Paper Range:
60 g/m
2
(16 lb) to 130 g/m
2
(35 lb)
Equivalent to 250 sheets of 75 g/m
2
(20 lb)
Table 3-6 Tray 2 and Tray 3 paper orientation
Single-sided printing Automatic duplex printing and
Alternative Letterhead Mode
Envelopes
Face-down
Top edge at the front of the tray
Face-up
Bottom edge at the front of the tray
Print envelopes only from Tray 1.
38 Chapter 3 Input trays and output bins ENWW
To Next Page
Loading...
