To change the default media-type setting type
1. On the device control panel, press Menu.
2. Use the < or the > button to select System setup, and then press Menu/Enter.
3. Use the < or the > button to select Paper setup, and then press Menu/Enter.
4. Use the < or the > button to select Def. paper type, and then press Menu/Enter.
5. Use the < or the > button to select a media type, and then press Menu/Enter.
6. Press Menu/Enter to save the selection.
ENWW Copying onto media of different types and sizes 49
To Next Page
Loading...
