Parts removal order
Use the following diagram to determine which parts must be removed before removing other parts.
Figure 5-2 Parts-removal tree
ADF
Bezel and control panel
Convenience stapler cartridge
Print cartridge
Transfer roller
Right cover
Left cover
Convenience stapler assembly
Convenience stapler inlet cable
Power switch PCAPrint-cartridge door
Top cover (Note: scanner assembly removed)
Rear cover
Convenience stapler power supply
Convenience stapler bracket and strap
Note: Convenience stapler
components are only for the
HP LaserJet M2727nfs.
Registration assembly
Scanner assembly
Speaker
Formatter
Duplex assembly
Laser/scanner assembly
Memory-tag reader assembly
Fan
Interlock assembly
Duplex-drive gears (Note: formatter removed)
Fuser
Main drive gears
Tray 2 pickup assembly
ECU (Note: interlock assembly removed)
Main motor
Note: some formatters
will include an Asian
character control panel
dispaly PCA.
98 Chapter 5 Removal and replacement ENWW
To Next Page
Loading...