Top cover
1. Remove the following components.
●
Right cover. See
Right cover on page 100.
●
Left cover. See
Left cover on page 102.
●
Rear cover. See
Rear cover on page 106.
●
Scanner/ADF assembly. See
Scanner/ADF assembly on page 117.
2. Open the print-cartridge door and loosen, but do not remove, one screw (callout 1).
Figure 5-18 Remove the top cover (1 of 4)
1
3. Loosen, but do not remove, one screw (callout 2) on the opposite side.
Figure 5-19 Remove the top cover (2 of 4)
2
108 Chapter 5 Removal and replacement ENWW
To Next Page
Loading...