HP LaserJet M2727 MFP Series - Page 176

Main motor
1. Remove the following components.
●
Right cover. See
Right cover on page 100.
●
Left cover. See
Left cover on page 102.
●
Rear cover. See
Rear cover on page 106.
●
Scanner/ADF assembly. See
Scanner/ADF assembly on page 117.
●
Top cover. See
Top cover on page 108.
●
Formatter. See
Formatter on page 132.
●
Fan. See
Fan on page 141.
●
Duplex-drive gears. See
Duplex-drive gears on page 143.
●
Interlock assembly. See
Interlock assembly on page 152.
●
ECU. See
Engine controller assembly (ECU) on page 153.
2. Remove three screws (callout 1).
Figure 5-87 Remove the main motor (1 of 2)
1
158 Chapter 5 Removal and replacement ENWW