Copy problems
Prevent problems
The following are a few simple steps you can take to improve copy quality:
●
Copy from the flatbed scanner. This will produce a higher quality copy than copying from the
automatic document feeder (ADF).
●
Use quality originals.
●
Load the media correctly. If the media is loaded incorrectly, it might skew, causing unclear images
and problems with the OCR program.
●
Use or make a carrier sheet to protect your originals.
NOTE: Verify that the media meets HP specifications. If the media meets HP specifications, recurring
feed problems indicate the pickup roller or separation pad is worn.
Image problems
Problem Cause Solution
Images are missing or faded. The print-cartridge toner level might be
low.
Replace the print cartridge. See Remove
the print cartridge on page 99.
The original might be of poor quality. If your original is too light or damaged,
the copy might not be able to
compensate, even if you adjust the
contrast. If possible, find an original
document in better condition.
The original might have a colored
background.
Colored backgrounds might cause
images in the foreground to blend into
the background, or the background might
appear in a different shade. If possible,
use an original document without a
colored background.
Vertical white or faded stripes appear on
the copy.
The media might not meet
HP specifications.
Use media that meets HP specifications.
The print-cartridge toner level might be
low.
Replace the print cartridge. See Remove
the print cartridge on page 99.
214 Chapter 6 Solve problems ENWW
To Next Page
Loading...