Problem-solve tools
Product information pages and reports
Information pages and reports reside within the product memory. These pages and reports help
diagnose and solve problems with the product.
NOTE: If the product language was not correctly set during installation, you can set the language
manually so the information pages print in one of the supported languages. Change the language by
using the System setup menu on the control panel or by using the embedded Web server.
Configuration page
The Configuration page shows the current settings and product properties. Print a Configuration page
from the product or HP ToolboxFX. To print from the product, complete the following steps:
1. On the product control panel, press Setup.
2. Use the arrow buttons to select Reports, and then press OK.
3. Use the arrow buttons to select Config report, and then press OK.
A second page also prints. On that page, the Fax Settings section provides details about the product
fax settings.
Supplies Status page
The Supplies Status page shows the remaining life of the HP print cartridge, the estimated pages
remaining, the number of pages printed, and other supplies information. Print a Supplies Status page
from the product or HP ToolboxFX. To print from the product, complete the following steps:
1. On the product control panel, press Setup.
2. Use the arrow buttons to select Reports, and then press OK.
3. Use the arrow buttons to select Supplies Status, and then press OK.
PCL, PCL 6, or PS font list
The PCL, PCL 6, or PS font list shows which fonts are currently installed in the product. To print the
PCL, PCL 6, or PS font list, complete the following steps:
1. On the product control panel, press Setup.
2. Use the arrow buttons to select Reports, and then press OK.
3. Use the arrow buttons to select PCL font list, PS font list, or PCL 6 font list, and then press
OK.
ENWW Problem-solve tools 237
To Next Page
Loading...