T.30 protocol trace
Use a T.30 protocol trace report to problem-solve fax transmission issues.
Print a T.30 protocol trace report
Send a fax from the product or receive a fax to the product from another fax machine, and then print a
T.30 trace report after the fax prints.
1. On the product control panel, press Setup.
2. Use the arrow buttons to select Service, and then press OK.
3. Use the arrow buttons to select Print T.30, and then press OK.
The product exits the menu settings and prints the reports.
Archive print
Archive print produces output that is less susceptible to toner smearing and dusting. Use archive print
to create documents that you want to preserve or archive.
Turn on archive print
1. On the product control panel, press Setup.
2. Use the arrow buttons to select Service, and then press OK.
3. Use the arrow buttons to select Archive print, On, or Off, and then press OK.
242 Chapter 6 Solve problems ENWW
To Next Page
Loading...