EasyManua.ls Logo

HP LaserJet M2727 MFP Series - Page 31

HP LaserJet M2727 MFP Series
370 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Software for Macintosh
For Mac OS X v10.3, v10.4, and later, use Print Center to print.
NOTE: For Macintosh computers, HP ToolboxFX is not supported.
HP Director
HP Director is a software program for working with documents. When the document is loaded into the
ADF and the computer is connected directly to the product, HP Director appears on the computer screen
to initiate faxing, scanning, or changing settings on the product through Macintosh Configure Device.
Also included is the HP product Setup Assistant, which sets up the fax and print queues.
Macintosh Configure Device (Mac OS X v10.3, v10.4, and later)
Macintosh Configure Device is a Web-based program that provides access to information about the
product (or example, information about supplies status and product settings). Use Macintosh Configure
Device to monitor and manage the product from the computer.
NOTE: You must perform a complete software installation to use Macintosh Configure Device.
Check the product status and print information pages.
Check and change product settings.
Check default print settings.
Check and change fax settings, including IP configuration, Advanced, mDNS, SNMP, network
configuration, and fax reports.
You can view Macintosh Configure Device when the product is directly connected to a computer or when
it is connected to the network.
NOTE: You do not have to have Internet access to open and use Macintosh Configure Device.
To view Macintosh Configure Device when the product is connected to the computer
1. Open HP Director by clicking the HP Director icon in the dock.
2. In HP Director, click Settings.
3. Select Configure Device to open the Macintosh Configure Device home page in a browser.
To view Macintosh Configure Device when the product is connected to the network
1. Open one of the following browsers:
Internet Explorer 5.0 or later
Netscape Navigator 4.75 or later
Opera 6.05 or later
Safari 1.2 or later
2. Type the IP address of the product into the Web browser to open the Macintosh Configure Device
home page.
ENWW Software for Macintosh 13

Related product manuals