HP LaserJet M2727 MFP Series - Operating environment

Operating environment
Place the product on a sturdy, level surface in a well-ventilated area. Make sure that the air vents are
not blocked and that the product is installed away from direct sunlight, open flames, and ammonia fumes.
Store or install the product in an area that meets the following requirements:
●
Temperature (printer; operating) 15
o
to 32.5
o
C (59
o
to 90.5
o
F)
●
Temperature (printer; storage) -20
o
to 60
o
C (-4
o
to 140
o
F)
●
Humidity (printer; operating) 10% to 80% relative humidity (no condensation)
●
Humidity (printer; storage) 10% to 90% relative humidity (no condensation)
●
Temperature (toner cartridge; storage) -20
o
to 40
o
C (-4 to 104
o
F)
●
Humidity (toner cartridge; storage) 10% to 90% relative humidity (no condensation)
Figure 2-1 Operating environment
700 mm (27.5 inches)
595 mm (
23.5 inc
hes)
790 m
m (
31.0 inches)
20 Chapter 2 Installation ENWW