250-sheet input tray (tray 3)
CAUTION: Always install the 250-sheet tray (tray 3) in the location where the product will remain. The
assembled combination is heavy, and cannot be easily moved.
1. Place the 250-sheet feeder (tray 3) on a sturdy, level surface.
2. Using the alignment pins at the corners of the tray as a guide place the product on top of the tray.
3. Make sure that the right-rear connector (callout 1) connects with the product.
Figure 2-4 Install the 250-sheet input tray
1
24 Chapter 2 Installation ENWW
To Next Page
Loading...