To load originals into the ADF
NOTE: The ADF capacity for the product is up to 50 sheets of 75 g/m
2
(20 lb) media.
1. Insert the stack of originals into the ADF input tray top-edge-first, with the media stack face-up and
the first page to be copied on the top of the stack. Slide the stack into the ADF until it does not
move any farther.
Figure 2-7 Load documents into the ADF (1 of 2)
2. Adjust the media guides until they are snug against the stack.
Figure 2-8 Load documents into the ADF (2 of 2)
3. The document is ready to be faxed, copied, or scanned.
Tray 1
Tray 1 is accessed from the front of the product. The product prints from tray 1 before attempting to print
from other trays.
ENWW Load paper and print media 27
To Next Page
Loading...