Manage supplies
This section describes replacing the print cartridge, staple cassette, tray 2 pickup roller, and the tray 2
and optional tray 3 separation pad. For information about replacing the ADF pickup-roller assembly, see
Replace the ADF pickup-roller assembly on page 110.
Inspect any parts that wear when servicing the product. Replace them as needed, based on failure or
wear rather than usage.
The following table lists approximate schedules for replacing consumables.
Life expectancies of supplies and the product
Item Capacity
HP LaserJet M2727 MFP Series Recommended maximum of 3,000 pages per month
Print cartridge 3,500 pages
1
(standard)
7,000 pages
1
(high-capacity)
Staple cassette 1,500 staples
1
The estimated print cartridge life is based on using letter- or A4-sized media with an average of 5% toner coverage and a
medium density setting. Print cartridge life can be extended by using draft-mode settings to conserve toner.
Order supplies
NOTE: To locate part numbers for supplies, see Accessories and ordering information
on page 247.
To order supplies, go to one of the following Web sites.
●
North America:
www.hp.com/go/orders/supplies-na
●
Europe and Middle East:
www.hp.com/go/orders/supplies-emea
●
Asia Pacific countries/regions:
www.hp.com/go/orders/supplies-ap
●
Latin America:
www.hp.com/go/orders/supplies-la
34 Chapter 3 Maintenance ENWW
To Next Page
Loading...