Replace the tray 2 pickup roller
CAUTION: Failure to correctly complete this procedure might cause damage to the product.
1. Perform the following tasks before beginning this procedure:
●
Turn off the product and unplug the power cord from the electrical outlet.
●
Open the print-cartridge door and remove the print cartridge.
●
Remove the tray 2 cassette.
●
Lift the product off of tray 3, if that tray is installed.
2. Place the product on its back on the work surface, with the front facing up.
WARNING! When you move the product into this position, the scanner cover can open suddenly
and be damaged. You must support the scanner cover to keep it from opening.
Figure 3-1 Replace the tray 2 pickup roller (1 of 7)
40 Chapter 3 Maintenance ENWW
To Next Page
Loading...