4. Lower the green lever and the roller assembly and close the ADF cover.
Figure 3-26 Clean the ADF pickup-roller assembly (4 of 5)
5. Plug in the product, and then turn it on.
Figure 3-27 Clean the ADF pickup-roller assembly (5 of 5)
Clean the paper path
During the printing process, paper, toner, and dust particles can accumulate inside the product. Over
time, this buildup can cause print-quality problems such as toner specks or smearing. This product has
a cleaning mode that can correct and prevent these types of problems.
Specks Smearing
56 Chapter 3 Maintenance ENWW
To Next Page
Loading...