Site preparation
Location specifications
Place the device on a sturdy, level surface in a well-ventilated area that meets the following
environmental requirements:
●
Temperature: 15° to 32°C (59° to 89°F)
●
Humidity: 10% to 80% relative humidity (no condensation)
●
Away from direct sunlight, open flames, and ammonia fumes
●
Allow sufficient space around the device for access and ventilation. (See
Table C-2 Printer
dimensions with all doors and trays fully opened on page 328 for the minimum space
requirements.)
Operating environment
Environmental condition Recommended Allowed
Temperature (device and print cartridge) 17° to 25°C (63° to 77°F) 15° to 32°C (59° to 89°F)
Relative humidity 30% to 70% (no condensation) 10% to 80% (no condensation)
NOTE Optimum performance of the device is assured under the recommended temperature
and humidity specifications. Print quality might deteriorate and occurrences of paper jams might
increase when the device is operated within the allowed temperature and humidity specifications.
22 Chapter 2 Installation and configuration ENWW
To Next Page
Loading...
