HP LaserJet M5035 MFP - Electrical specifications

Electrical specifications
WARNING! Power requirements are based on the country/region where the device is sold. Do
not convert operating voltages. This can damage the device and void the product warranty.
Table C-3 Power requirements
Specification 110-volt models 220-volt models
Power requirements 100 to 127 Vac
50/60 Hz
220 to 240 Vac
50/60 Hz
Rated current 8.0 Amps 4.5 Amps
Table C-4 Power consumption (average, in watts)
1
Model Printing
2
Copying Ready or
standby
3,4
Sleep
5
Off
HP LaserJet M5025 MFP < 615 W
6
615 W 75 W 21 W 0.01 W
HP LaserJet M5035 MFP < 615 W
7
615 W 75 W 21 W 0.01 W
HP LaserJet M5035X MFP < 615 W
7
615 W 75 W 21 W 0.01 W
HP LaserJet M5035XS MFP < 615 W
7
615 W 75 W 21 W 0.01 W
1
Values subject to change. See www.hp.com/support/M5025mfp or www.hp.com/support/M5035mfp for current information.
2
Power numbers are the highest values measured using all standard voltages.
3
Default time from Ready mode to Sleep = 30 minutes.
4
Heat dissipation in Ready mode = 37.5 BTU/hour.
5
Recovery time from Sleep to start of printing = less than 8.5 seconds.
6
Print speed is 25 ppm.
7
Print speed is 35 ppm.
ENWW Electrical specifications 251