Load trays 2 and 3 (and optional trays 4, 5, and 6)
Trays 2 and 3 (and optional trays 4, 5, and 6) support only paper. For supported paper sizes, see Select
print media.
NOTE To take advantage of automatic size-sensing in the trays, load letter- and A4-size paper
with the short edge of the media toward the front of the tray, as detailed in the steps below.
1. Open the tray.
2. Press the tab on the paper-length guide and slide it so that the pointer matches the paper size that
you are loading. Make sure that the guide clicks into place. Also adjust the side media-width guides
so that the pointer matches the paper size that you are loading.
76 Chapter 4 Media and trays ENWW
To Next Page
Loading...