HP LaserJet MFP - Page 97

ENWW Other regulatory information 89
English
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturer's Name: Hewlett-Packard Company
Manufacturer's Address: 11311 Chinden Boulevard
Boise, Idaho 83714-1021 USA
declares that the product
Product Names: HP LaserJet MFP Analog Fax Accessory 300
Model Numbers: Q3701-60001, Q3701-60002,
Q3701-60004
Regulatory Model:
3)
BOISB-0308-00
Product Options: ALL
conforms to the following Product Specifications:
Safety: IEC 60950:1999 / EN60950: 2000
GB4943-1995
EMC: CISPR 22:1998 / EN 55022:1998 - Class A
1)
EN 61000-3-2:2000
EN 61000-3-3:1995 + A1:2001
EN55024:1998
FCC Title 47 CFR, Part 15 Class A
2)
/ ICES-003, Issue 4
GB9254-1998
TELECOM: TBR-21:1998
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC, the Low
Voltage Directive 73/23/EEC, the R&TTE Directive 1999/5/EC (Annex II) and carries the CE-Marking
accordingly.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer
Systems.
2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two
Conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Warning - This is a Class A product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take adequate measures.
3) For regulatory purposes, this product is assigned a Regulatory model number. This number
should not be confused with the marketing name (HP LaserJet MFP Analog Fax Accessory 300)
or the product numbers (Q3701-60001, Q3701-60002).
4) The product includes Multi-Tech Systems, Inc. Modem Module, Type MT5634SMI.
Boise, Idaho USA
February, 2004
Australian Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn,
Victoria 3130, Australia.
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh, Department
HQ-TRE / Standards Europe, Herrenberger Strasse 130, D-71034 Böblingen
(FAX: +49-7031-14-3143)
USA Contact: Product Regulations Manager, Hewlett-Packard Development Company, LP, PO Box 15,
Mail Stop 160, Boise, Idaho 83707-0015 (Phone: 208-396-6000)