HP LaserJet P3005 Series Troubleshooting Guide

Control panel message Description Recommended action
22-EIO X BUFFER OVERFLOW
alternates with
To continue press
For devices with an EIO device only.
The device EIO card in slot X has overflowed
its I/O buffer during a busy state.
1.
Press
to continue printing.
NOTE Data will be lost.
2. If the message persists, contact
HP Support.
22-EMBEDDED I/O BUFFER OVERFLOW The embedded HP Jetdirect print server
buffer has overflowed during a busy state.
1.
Press
to continue printing.
NOTE Data will be lost.
2. If the message persists, contact
HP Support.
22-PARALLEL I/O BUFFER OVERFLOW
alternates with
To continue press
The device parallel buffer has overflowed
during a busy state.
1.
Press
to continue printing.
NOTE Data will be lost.
2. If the message persists after exiting
Help, contact HP Support.
22-SERIAL I/O BUFFER OVERFLOW
alternates with
To continue press
The device serial buffer has overflowed
during a busy state.
1.
Press
to continue printing.
NOTE Data will be lost.
2. If the message persists, contact
HP Support.
22-USB I/O BUFFER OVERFLOW
alternates with
To continue press
The device's USB buffer has overflowed
during a busy state.
1.
Press
to continue printing.
NOTE Data will be lost.
2. If the message persists, contact
HP Support.
40 BAD SERIAL TRANSMISSION
alternates with
To continue press
A serial data error (parity, framing, or line
overrun) has occurred while the device was
receiving data.
1.
Press to continue printing.
NOTE Data will be lost.
2. If the message persists, contact
HP Support.
40 EIO X BAD TRANSMISSION
alternates with
To continue press
A connection with the card in the EIO slot has
broken.
1.
Press
to continue printing.
NOTE Data will be lost.
2. If the message persists, contact
HP Support.
www.partshere.com Partshere Troubleshooting

HP LaserJet P3005 Series Specifications

General

Duplex Printing Accessory	Optional
Print Technology	Laser
Processor Speed	400 MHz
Print Languages	HP PCL 5e, HP PCL 6, HP Postscript Level 3 emulation
Paper Trays, Maximum	3
First Page Out Black	8.5 seconds
Resolution	1200 x 1200 dpi
Display	2-line LCD
Memory, Standard	64 MB
Hard Disk	Optional
Connectivity, Standard	USB 2.0, Parallel
Network Ready	Optional with external print server
Power	AC 220-240V, 50/60 Hz
Operating Temperature Range	15°C to 32.5°C
Type	Laser Printer
Interface	USB 2.0, Parallel
Supported Operating Systems	Windows, Linux, Mac OS X
Operating Humidity Range	20 to 80% RH
Paper Capacity	1, 100 sheets (maximum)