HP LaserJet P3005 Series Troubleshooting Guide

Control panel message Description Recommended action
40 EMBEDDED I/O BAD TRANSMISSION
alternates with
To continue press
The connection with the HP Jetdirect
embedded print server has broken.
1.
Press
to continue printing.
NOTE Data will be lost.
2. If the message persists, contact
HP Support.
41.3 UNEXPECTED SIZE IN TRAY
alternates with
LOAD TRAY X
Media is loaded that is longer or shorter in the
feed direction than the size configured for the
tray.
1.
Press
to print from a different tray.
2. To print from the current tray, load the
tray with the size and type indicated.
Ensure that all trays are configured correctly
before printing again. See
Load input trays
on page 19 for more information.
41.5 UNEXPECTED TYPE IN TRAY X
alternates with
LOAD TRAY X
The device senses a different media type
than what is configured in the tray.
1.
Press
to print from a different tray.
2. To print from the current tray, load the
tray with the size and type indicated.
Ensure that all trays are configured correctly
before printing again. See Load input trays
on page 19 for more information.
41.X ERROR
alternates with
To continue press
A device error has occurred. 1.
Press
to continue or press for
more information.
2. If the message persists after exiting
help, turn the device off and then on.
3. If the message persists, contact
HP Support.
49.XXXXX ERROR
alternates with
Power off then on
A critical firmware error has occurred. 1. Turn the device off and then on.
2. Try to determine whether the error
occurs intermittently, while printing, or
when turning on the device.
3. If the error appears while printing,
determine whether it occurs when
printing from a specific computer, a
specific application, or a specific file. If
all other computers, applications, or files
can print without the error, then the
problem may be only within one print job
or computer. Make sure the computer
has the most current printer drivers, or
use a generic printer driver.
4. Go to
www.hp.com/support/LJP3005.
Click Download Drivers and
Software. Check for the latest firmware
image version at the bottom of the page.
If this firmware image is newer than the
one installed on the device and the
device can receive a firmware update,
download the newer firmware upgrade.
5. Try printing a job from a different
software program. If the job prints, go
www.partshere.com Partshere Troubleshooting

HP LaserJet P3005 Series Specifications

General

Duplex Printing Accessory	Optional
Print Technology	Laser
Processor Speed	400 MHz
Print Languages	HP PCL 5e, HP PCL 6, HP Postscript Level 3 emulation
Paper Trays, Maximum	3
First Page Out Black	8.5 seconds
Resolution	1200 x 1200 dpi
Display	2-line LCD
Memory, Standard	64 MB
Hard Disk	Optional
Connectivity, Standard	USB 2.0, Parallel
Network Ready	Optional with external print server
Power	AC 220-240V, 50/60 Hz
Operating Temperature Range	15°C to 32.5°C
Type	Laser Printer
Interface	USB 2.0, Parallel
Supported Operating Systems	Windows, Linux, Mac OS X
Operating Humidity Range	20 to 80% RH
Paper Capacity	1, 100 sheets (maximum)