Tab or section Description
System tab
Provides the ability to configure the
product from your computer.
●
Device Information: Provides basic product and company information.
●
Paper Setup: Allows you to change the paper-handling defaults for the product.
●
Print Quality: Allows you to change the print quality defaults for the product,
including calibration settings.
●
Print Density: Allows you to change the contrasts, highlights, midtones, and
shadows values for each supply.
●
Paper Types: Allows you to configure print modes that correspond to the paper
types that the product accepts.
●
System Setup: Allows you to change the system defaults for the product.
●
Service: Allows you to start the cleaning procedure on the product.
●
Product Security: Allows you to set or change the product password.
●
Support button: Provides a link to the product support page.
●
Shop for Supplies button: Provides a link to a page where you can order
supplies for the product.
NOTE: The System tab can be password-protected. If this product is on a network,
always consult with the administrator before changing settings on this tab.
Print tab
Provides the ability to change
default print settings from your
computer.
●
Printing: Change the default product print settings, such as number of copies and
paper orientation. These are the same options that are available on the control
panel.
●
PCL5c: View and change the PCL5c settings.
●
PostScript: View and change the PS settings.
Networking tab
Provides the ability to change
network settings from your
computer.
Network administrators can use this tab to control network-related settings for the product
when it is connected to an IP-based network. This tab does not appear if the product is
directly connected to a computer.
HP Web Services tab Use this tab to set up and use various Web tools with the product.
ENWW
HP Device Toolbox (Windows)
63
To Next Page
Loading...