HP LASERJET PRO 200 COLOR M251n - Set the product to automatically update the firmware (touchscreen control panel)

●
Manage Updates
●
Check Automatically
3. Select the On option, and then press the OK the button.
Set the product to automatically update the firmware (touchscreen
control panel)
NOTE: This section applies to the HP LaserJet Pro 200 color M251nw Printer model only.
1.
From the Home screen on the control panel, touch the Setup
button.
2. Open the following menus:
●
Service
●
LaserJet Update
●
Manage Updates
●
Check Automatically
3. Touch the On option.
78 Chapter 4 Manage and maintain the product ENWW