Figure 2-2 Incompatible Print Settings dialog
To resolve the conflicting settings, click the Restore my previous settings option, and then click the
OK button. The driver resets the conflicting control back to its previous state.
If you want to keep the conflicting setting, click the Keep this setting, and I will change it later
option, and then click the OK button.
NOTE: In this example, the conflict can be resolved manually. If the conflict is not resolved when the
driver is closed, then the same dialog appears again when a print job is sent to the product.
Advanced tab features
NOTE: The Advanced tab is located on the Printing Preferences tab set.
Use the Advanced tab to change the layout of printed pages. Use this tab to configure special
controls that are not commonly used, as well as to control features such as collating and font
management in the driver (although most current software programs support these features in the print
dialog box or through the page settings in the software program). The following figure shows the
Advanced tab.
ENWW
HP LaserJet software components for Windows®
19
To Next Page
Loading...
