PCL5
Use the PCL5 page to change the PCL defaults for the product.
Figure 2-34 HP Device Toolbox, Print tab – PCL5 page
PostScript
Use the PostScript pane to turn off/on PostScript printing errors.
If Print PostScript errors is set to On, the product will print multiple pages of PostScript characters
when an error is encountered.
If Print PostScript errors is set to Off (default), the product suppresses this printing behavior.
Figure 2-35 HP Device Toolbox, Print tab – PostScript page
Networking tab
Use the Networking tab to view and change settings for the network connection and communication
with the product. The following pages are available:
●
Network Summary
●
IPv4 Configuration
●
IPv6 Configuration
●
Wireless Configuration
●
Wireless Direct Setup
ENWW
HP LaserJet software components for Windows®
75
To Next Page
Loading...
