6- Product Packaging Data
• Packaging materials do not contain lead, mercury, cadmium or hexavalent chromium as an intentionally
added element. The sum concentration of incidental lead, mercury, cadmium and hexavalent chromium in
the packaging for this product is less than 100mg/kg.
• No chlorofluorocarbons (CFCs), halons, HCFCs, HBFCs, 1,1,1 trichloroethane, carbon tetrachloride or
methyl bromide are used in plastic foam packaging materials.
• Plastic packaging materials are marked according to ISO 11469 and DIN 6120 standards.
Product Packaging: (HP LaserJet Pro 400 M401dn)
Corrugated Paper
1
Weight: 2.31 kg
Expanded Polystyrene Foam (EPS) Weight: 0.005 kg
Expanded Polyethylene Foam (EPE) Weight: 0.03 kg
LDPE (bag) Weight: 0.08 kg
1. Made from recycled paper. Actual proportions of recycled content will vary depending on geographic location.
HP designs packaging to be recyclable where practical. The recyclability of the packaging depends on the
availability of municipal recycling programs for the packaging used.
• To ensure compliance with local packaging take-back requirements, in the following European countries, HP
is a member of a packaging recovery scheme. Some countries are operating a “Green Dot” system as
indicated.
Countries with Green Dot systems
– Austria (ARA)
– Belgium (Fostplus: consumer products) (Val-I-Pac: professional products)
– Bulgaria (Ecopak)
– Croatia (Eko-Ozra)
– Czech Republic (Eko-Kom)
– Estonia (ERO)
– Finland (PYR Ltd)
– France (Eco-Emballages)
– Germany (DSD)
– Greece (HERRCO)
– Hungary (OKO-Pannon Kht)
– Ireland (Repak)
– Lithuania (Zaliasis taskas)
– Luxembourg (Valorlux)
– Norway (Gront Punkt)
– Portugal (Punto Verde SA)
– Romania (Eco Rom)
– Slovakia (Envi Pak)
– Slovenia (SloPak)
– Spain (Ecoembes)
– Sweden (Repa Registret)
– Turkey (Sevko)
Countries with no Green Dot system
To Next Page
Loading...