– Italy (Conai)
– Norway (Materialretur)
– Switzerland (SWICO)
– UK (Valpak)
• Some larger HP offices also accept HP product packaging* from customers in countries or areas without
local packaging recovery schemes. Contact your local HP sales office for more information.
*This does not include packaging that is contaminated or contains dangerous substances, which should be disposed of in accordance with
local regulations.
7- End-of-Life Management/ Recyclability
Hewlett-Packard offers the Planet Partners product return program for both hardware and supplies in many
geographic areas.
To determine if a program is available for this HP product in your area, please refer to our recycling Web site
at
http://www.hp.com/recycle or contact your nearest HP sales office. Products returned to HP will be
recycled, recovered or disposed of in a responsible manner
This HP product is designed to enhance end-of-life disposal options by:
• Marking plastic parts weighing more than 25g according to ISO 11469 international standards
• Eliminating glues and adhesives from product construction where technically feasible
• Using common fasteners
• Including snap-in features
This HP product contains the following materials that may require special handling at end-of-life:
• A lithium carbon monofluoride battery located on the formatter board
For recycling information, you can contact
http://www.hp.com/recycle or contact your local authorities or the
Electronics Industries Alliance: http://www.eiae.org.
The following information is available online at http://www.hp.com/go/environment
• More about HP’s commitment to the environment
• Material Safety Data Sheets (MSDS) for HP printer supplies
• Environmental profiles ITECO Declarations for many related HP products
• End-of-life return and recycling programs for selected HP products, depending upon geographic location
To Next Page
Loading...