Fax from the flatbed scanner
1. Place the document face-down on the
scanner glass.
2. From the Home screen on the product
control panel, touch the Fax button.
3. Use the keypad to enter the fax number.
4. Touch the Start Fax button.
5. The product prompts you to confirm that you
are sending from the scanner glass. Touch
the Yes button.
6. The product prompts you to load the first
page. Touch the OK button.
7. The product scans the first page and then
prompts you to load another page. If the
document has multiple pages, touch the Yes
button. Continue this process until you have
scanned all the pages.
8. When you have scanned the last page,
touch the No button at the prompt. The
product sends the fax.
12 Quick Reference Guide ENWW
To Next Page
Loading...
