HP LaserJet Pro 500 - Product Introduction

List of figures
Figure 1-1 Phillips and Pozidriv screwdriver comparison ............................................................................ 3
Figure 1-2 DC controller PCA ................................................................................................................. 7
Figure 1-3 Remove the toner cartridge (1 of 2) ......................................................................................... 9
Figure 1-4 Remove the toner cartridge (2 of 2) ....................................................................................... 10
Figure 1-5 Remove the duplex-reverse guide (1 of 2) ............................................................................... 11
Figure 1-6 Remove the duplex-reverse guide (2 of 2) ............................................................................... 11
Figure 1-7 Remove the toner-collection unit (1 of 4) ................................................................................. 12
Figure 1-8 Remove the toner-collection unit (2 of 4) ................................................................................. 12
Figure 1-9 Remove the toner-collection unit (3 of 4) ................................................................................. 13
Figure 1-10 Remove the toner-collection unit (4 of 4) ............................................................................... 13
Figure 1-11 Remove Tray 2 and 3 (1 of 2) ............................................................................................. 14
Figure 1-12 Remove Tray 2 and 3 (2 of 2) ............................................................................................. 14
Figure 1-13 Remove the pickup roller and separation pad (Tray 1) (1 of 3) ................................................ 15
Figure 1-14 Remove the pickup roller and separation pad (Tray 1) (2 of 3) ................................................ 15
Figure 1-15 Remove the pickup roller and separation pad (Tray 1) (3 of 3) ................................................ 16
Figure 1-16 Remove the pickup roller (Tray 2) (1 of 4) ............................................................................. 17
Figure 1-17 Remove the pickup roller (Tray 2) (2 of 4) ............................................................................. 17
Figure 1-18 Remove the pickup roller (Tray 2) (3 of 4) ............................................................................. 18
Figure 1-19 Remove the pickup roller (Tray 2) (4 of 4) ............................................................................. 18
Figure 1-20 Remove the pickup and feed rollers (Tray 3) (1 of 2) .............................................................. 19
Figure 1-21 Remove the pickup and feed rollers (Tray 3) (2 of 2) .............................................................. 20
Figure 1-22 Remove the separation roller (Tray 2) ................................................................................... 21
Figure 1-23 Remove the transfer roller (1 of 3) ....................................................................................... 22
Figure 1-24 Remove the transfer roller (2 of 3) ....................................................................................... 22
Figure 1-25 Remove the transfer roller (3 of 3) ....................................................................................... 23
Figure 1-26 Reinstall the transfer roller ................................................................................................... 23
Figure 1-27 Remove the intermediate transfer belt (1 of 4) ....................................................................... 24
Figure 1-28 Remove the intermediate transfer belt (2 of 4) ....................................................................... 24
Figure 1-29 Remove the intermediate transfer belt (3 of 4) ....................................................................... 25
Figure 1-30 Remove the intermediate transfer belt (4 of 4) ....................................................................... 26
Figure 1-31 Remove the front-door assembly (1 of 2) ............................................................................... 27
Figure 1-32 Remove the front-door a
ssembly (2 of 2) ............................................................................... 27
ENWW xiii