Print-quality troubleshooting tools
Calibrate the product to align the colors
If the printed output has colored shadows, blurry graphics, or areas that have poor color, you might
need to calibrate the product to align the colors. Print the Diagnostics Page from the Reports menu on
the control panel to check the color alignment. If the blocks of color on that page are not aligned with
each other, you need to calibrate the product.
1. On the product control panel, open the System Setup menu.
2. Open the Print Quality menu, and select the Color Calibration item.
3. Select the Calibrate Now option.
Control panel menus
Setup Menu
To open this menu, touch the Setup button. The following sub menus are available:
●
Reports
●
Quick Forms
●
Fax Setup
●
System Setup
●
Service
●
Network Setup
ENWW
Tools for troubleshooting
133
To Next Page
Loading...
