Media types
Media-type commands
The PCL 5 escape sequence for paper type is "Esc&n#Wdpapertype", where "n#" is the number of
characters in the paper type plus 1. For example, in the sequence "Esc&n6WdPlain", "Plain" has 5
letters plus 1, for a total of 6.
Table 7-3 Media-type commands
Esc& n# Wd Paper type
Esc& 6 Wd Plain
Esc& 11 Wd Preprinted
Esc& 11 Wd Letterhead
Esc& 13 Wd
Transparency
1
Esc& 11 Wd Prepunched
Esc& 7 Wd Labels
Esc& 5 Wd Bond
Esc& 9 Wd Recycled
Esc& 6 Wd Color
Esc& 11 Wd
Cardstock
2
Esc& 6 Wd Rough
Esc& 9 Wd Envelope
1
You must spell out the word "Transparency" in the string, although it is abbreviated as TRNSPRNCY on the control panel.
2
The correct command for cardstock is "Esc&n11WdCard Stock", with a space between the "d" and the "S", and with an
uppercase "S".
Parameter settings (fax data-store parameters)
NOTE: Refer to the service manual for your HP LaserJet all-in-one product for information about
changing the fax data-store parameters.
244 Chapter 7 Engineering Details ENWW
To Next Page
Loading...
