Figure 2-3 Scan Setup Options dialog box
NOTE: The Change the destinations that show up on the all-in-one control panel
when I press the <Scan To> button. option appears only if HP ToolboxFX is running.
Many of the dialog boxes in the HP Scan software contain the following four common buttons:
●
Click Back to return to the previous dialog box.
●
Click Next to go to the next dialog box.
●
Click Cancel to cancel the creation or deletion of a scan destination.
●
Click Help to gain access to context-sensitive help for the dialog box.
The HP Scan software presents a series of dialog boxes that depend on the selections made in the HP
Scan software dialog boxes.
ENWW
Scan software
31
To Next Page
Loading...
