Fuser power supply
1. Remove the following components:
●
Right cover. See
Right cover on page 15.
●
Left cover. See
Left cover on page 18.
●
Rear right cover. See
Rear right cover on page 21.
●
Rear door and rear lower cover. See
Rear door and rear lower cover on page 23.
2. Remove two screws (callout 1) and the fuser power supply cover (callout 2).
Figure 1-73 Remove the fuser power supply (1 of 4)
2
1
ENWW
Removal and replacement procedures
61
To Next Page
Loading...