Right cover, simplex product
Before proceeding, remove the following components:
●
Dust cover. See Dust cover on page 11
●
Input tray assembly. See Input tray assembly on page 11.
●
Output tray assembly. See Output tray assembly on page 11.
●
Left cover. See Left cover, simplex product on page 13.
●
Front cover assembly. See Front cover assembly on page 15.
Remove the right cover, simplex product
1. Remove one screw (callout 1).
Figure 1-21 Remove the right cover, simplex product (1 of 2)
To Next Page
Loading...