Top cover
Before proceeding, remove the following components:
●
Main-input tray. See Input tray assembly on page 11.
●
Output bin tray extension. See Output tray assembly on page 11.
●
Left cover. See Left cover, duplex product on page 12 or Left cover, duplex product on page 12.
●
Right cover. See Right cover, duplex product on page 16 or Right cover, simplex product on page 18.
●
Cartridge door. See Cartridge door, duplex product on page 29 or Cartridge door, simplex product
on page 23.
●
Front cover. See Front cover assembly on page 15.
Remove the top cover
1. Remove two screws (callout 1).
CAUTION: The upper-cartridge door arms (callout 2) can become easily be dislodged from the lower
arms. Do not lose the upper-cartridge door arms while servicing the product.
Figure 1-43 Remove the top cover (1 of 2)
To Next Page
Loading...