HP LaserJet Pro MFP M225 - Page 56

Table 1-3 Parts identification: LaserJet Pro MFP M225, M226 (continued)
Item Description
8 Dust cover
9 Output tray assembly
Not shown Scanner/ADF assembly
Input and output tray assemblies (all models)
Dust cover
Release two shafts (callout 1) and remove the dust cover (callout 2).
Figure 1-46 Remove the dust cover (1 of 1)
2
1
Input tray assembly
1. Remove the dust cover.
2. Pull the input tray assembly (callout 1) towards the front side of the printer and remove it.
36 Chapter 1 Removal and replacement ENWW