HP LaserJet Pro MFP M225 - Page 74

Transfer roller
CAUTION: Do not touch the sponge portion of the roller. Skin oils can cause print quality problems.
1. Open the print-cartridge door.
2. Release two tabs (callout 1), and then remove the transfer roller (callout 2).
Figure 1-71 Remove the transfer roller
1
2
Internal assemblies
Formatter PCA
1. Remove the left cover. See Left cover, duplex product on page 12 or Left cover, simplex product
on page 13 or Left cover on page 37.
54 Chapter 1 Removal and replacement ENWW