HP Latex 300 Series - E-Box Components; Description; Components; Functionality

LFP Customer Assurance
18
HP
6.2
TILE-CUTTING TECHNIQUE #2: AUTOMATIC CUTTING WITH FOTOBA XLD170WP
Fotoba XLD170WP is a complete automatic X/Y cutter which features true image-edge tracking, in order to
compensate for any misalignment on the print or on the media.
A specific default setting is suggested for the thickness of the cut marks.
Set up your cut marks for Fotoba XLD170WP cutting (Caldera RIP software)
From the Caldera driver controller, select the
Placement
tab and then the
Marks
tab. Enable
Trimmers
and
then click
Edit.
In the new window, select
Cutter
tab. Select
XLD170.