To Next Page

To Previous Page

LFP Customer Assurance

PRINTER CALIBRATIONS AND SETTINGS

4.1

PRINTER FIRMWARE CONSIDERATIONS

Please ensure your HP Latex 300 Series printer (310/330/360/370) always has the latest firmware version.

You can download the latest firmware from HP’s Web site or from the HP Latex 300 Series printer’s control

panel:

•

Web

Go to: http://www8.hp.com/us/en/drivers.html . Find your product > Select your OS > Download the

*.fmw file > Install it via the printer’s Embedded Web Server.

•

Printer front-panel

Select the

Printer

option >

Check Updates

Check Now.

Firmware version 07_00.11

In June 2016, firmware version 07_00.11 was released and it includes significant improvements like the new

“Long Run Consistency Mode” feature. This option improves color consistency over long runs.

To enable it, press on your printer’s front-panel, go to

Substrate library

, choose the substrate for which

you want to enable this feature, tap

Modify

and check the “Long Run Consistency Mode (System Preheat)”

box:

NOTE: The name of this feature for HP Latex 310 and 330 units is just “Long Run Consistency Mode,” without

the last informative description (“System Preheat”).

Once enabled, the following message will appear:

HP Latex 300 Series Manual

Other manuals for HP Latex 300 Series