HP LP2065 User Manual

QuickSpecs
HP LP2065 20-inch LCD
Monitor
Technical Specifications
Worldwide — Version 6 — September 25, 2007 Page 5
· HDPE Bag 0.065 kg
· Polystyrene 0.535 kg
Material Usage This product does not contain any of the following substances in excess of
regulatory limits (refer to the HP General Specification for the
Environment at
www.hp.com/hpinfo/globalcitizenship/environment/supplychain/gen_s
pecifications.html):
· Asbestos
· Certain Azo Colorants
· Certain Brominated Flame Retardants – may not be used as flame
retardants in plastics
· Cadmium
· Chlorinated Hydrocarbons
· Chlorinated Paraffins
· Formaldehyde
· Halogenated Diphenyl Methanes
· Lead carbonates and sulfates
· Lead and Lead compounds
· Mercuric Oxide Batteries
· Nickel – finishes must not be used on the external surface designed to
be frequently handled or carried by the user.
· Ozone Depleting Substances
· Polybrominated Biphenyls (PBBs)
· Polybrominated Biphenyl Ethers (PBBEs)
· Polybrominated Biphenyl Oxides (PBBOs)
· Polychlorinated Biphenyl (PCB)
· Polychlorinated Terphenyls (PCT)
· Polyvinyl Chloride (PVC) – except for wires and cables, and certain
retail packaging has been voluntarily removed from most applications.
· Radioactive Substances
· Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)
Packaging HP follows these guidelines to decrease the environmental impact of
product packaging:
· Eliminate the use of heavy metals such as lead, chromium, mercury and
cadmium in packaging materials.
· Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
· Design packaging materials for ease of disassembly.
· Maximize the use of post-consumer recycled content materials in
packaging materials.
· Use readily recyclable packaging materials such as paper and
corrugated materials.
· Reduce size and weight of packages to improve transportation fuel
efficiency.
· Plastic packaging materials are marked according to ISO 11469 and
DIN 6120 standards.
End-of-life Management Hewlett-Packard offers end-of-life HP product return and recycling

HP LP2065 Specifications

General

3D	Yes
Pixel pitch	0.255 x 0.255 mm
Response time	8 ms
Display diagonal	20.1 \
Display resolution	1600 x 1200 pixels
Vertical scan range	48 - 85 Hz
Horizontal scan range	30 - 94 kHz
Contrast ratio (dynamic)	-
Contrast ratio (typical)	800:1
Display brightness (typical)	300 cd/m²
USB hub version	2.0
DVI-I ports quantity	2
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	5
LED indicators	Power
Tilt angle range	-5 - 25 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Power consumption (standby)	2 W
Power consumption (typical)	75 W
Storage temperature (T-T)	10 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 80 %
Certification	TCO'03, TUV-Ergo, UL, VCCI, CE, ISO 13406-2
Country of origin	China
Market positioning	Business

Weight and Dimensions

Depth (with stand)	220 mm
Height (with stand)	425 mm
Weight (with stand)	9200 g
Depth (without stand)	87 mm
Width (without stand)	443 mm
Height (without stand)	345 mm
Weight (without stand)	5750 g