HP LP2465 User Manual

ENWW
Rear Components
Figure 3-2 Rear Components
Component Function
1 Cable Lock Provision Provides slot for use with cable security locks.
2 Master Power Switch Turns off all power to the monitor.
3 AC Power Connector Connects the AC power cord to the monitor.
4 DVI-I Connectors Connects the DVI-I to VGA signal cable or DVI-D signal
cable to the monitor.
5 USB Upstream
Connector
Connects the monitor USB hub to a host USB port/hub.
6 USB Downstream
Connectors
Connects optional USB devices to the monitor.
7 USB Downstream
Connectors (side panel)
Connects optional USB devices to the monitor.
Chapter 3 Setting Up the Monitor 6

HP LP2465 Specifications

General

Pixel pitch	0.27 x 0.27 mm
Aspect ratio	16:10
Response time	6 ms
Display diagonal	24 \
Separate H/V sync	Yes
Display resolution	1920 x 1200 pixels
Vertical scan range	48 - 85 Hz
Viewable size, vertical	326 mm
Contrast ratio (dynamic)	-
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	520 mm
Display brightness (typical)	500 cd/m²
USB hub version	2.0
DVI-I ports quantity	2
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	5
Product color	Black, Silver
Country of origin	China
Pivot angle	0 - 90 °
Tilt angle range	-5 - 25 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Power consumption (standby)	2 W
Power consumption (typical)	75 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	232 mm
Height (with stand)	371 mm
Depth (without stand)	92 mm
Width (without stand)	554 mm
Height (without stand)	366 mm
Weight (without stand)	10700 g