To Next Page

To Previous Page

ENWW

Installing the .INF and .ICM Files

After you determine that you need to update, you can install the .INF and .ICM files from the CD or

download them.

Installing from the CD

To install the .INF and .ICM files on the computer from the CD:

1. Insert the CD in the computer CD-ROM drive. The CD menu is displayed.

2. View the Monitor Driver Software Readme file.

3. Select Install Monitor Driver Software.

4. Follow the on-screen instructions.

5. After the software has been installed, restart Windows.

6. Ensure that the proper resolution and refresh rates appear in the Windows Display control panel.

NOTE You may need to install the digitally signed monitor .INF and .ICM files manually from

the CD in the event of an installation error. Refer to the Monitor Driver Software Readme file

on the CD.

Downloading from the Worldwide Web

To download the latest version of .INF and .ICM files from the HP monitors support Web site:

1. Refer to http://www.hp.com/support and select the country region.

2. Follow the links for the monitor to the support page and download page.

3. Ensure the system meets the requirements.

4. Download the software by following the instructions.

20 Chapter 4 Operating the Monitor

Questions and Answers:

Need help?

Do you have a question about the HP LP2465 and is the answer not in the manual?

HP LP2465 Specifications

General

Pixel pitch	0.27 x 0.27 mm
Aspect ratio	16:10
Response time	6 ms
Display diagonal	24 \
Separate H/V sync	Yes
Display resolution	1920 x 1200 pixels
Vertical scan range	48 - 85 Hz
Viewable size, vertical	326 mm
Contrast ratio (dynamic)	-
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	520 mm
Display brightness (typical)	500 cd/m²
USB hub version	2.0
DVI-I ports quantity	2
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	5
Product color	Black, Silver
Country of origin	China
Pivot angle	0 - 90 °
Tilt angle range	-5 - 25 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Power consumption (standby)	2 W
Power consumption (typical)	75 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions