To Next Page

To Previous Page

ENWW

Connecting the Monitor

1. Place the monitor in a convenient, well-ventilated location near the computer.

2. Connect one end of the USB hub cable to the USB connector on the rear panel of the computer,

and the other end to the upstream USB connector on the monitor.

Figure 3-5 Connecting the USB Cable

WARNING! To reduce the risk of electric shock or damage to the equipment:

• Do not disable the power cord grounding plug. The grounding plug is an important

safety feature.

• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible

at all times.

• Disconnect power from the equipment by unplugging the power cord from the electrical

outlet.

For your safety, do not place anything on power cords or cables. Arrange them so that no

one may accidentally step on or trip over them. Do not pull on a cord or cable. When

unplugging from the electrical outlet, grasp the cord by the plug.

Chapter 3 Setting Up the Monitor 8

Questions and Answers:

Need help?

Do you have a question about the HP LP2465 and is the answer not in the manual?

HP LP2465 Specifications

General

Pixel pitch	0.27 x 0.27 mm
Aspect ratio	16:10
Response time	6 ms
Display diagonal	24 \
Separate H/V sync	Yes
Display resolution	1920 x 1200 pixels
Vertical scan range	48 - 85 Hz
Viewable size, vertical	326 mm
Contrast ratio (dynamic)	-
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	520 mm
Display brightness (typical)	500 cd/m²
USB hub version	2.0
DVI-I ports quantity	2
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	5
Product color	Black, Silver
Country of origin	China
Pivot angle	0 - 90 °
Tilt angle range	-5 - 25 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Power consumption (standby)	2 W
Power consumption (typical)	75 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions