HP M3035 - LaserJet MFP B/W Laser - Page 178

Tray 1 solenoid
1. Remove the following components:
●
All covers (see
Covers on page 94) and the ADF/scanner assembly (see Scanner
assembly on page 90)
●
Fax accessory (see
Fax accessory on page 111)
●
Disk drive (see
Disk drive on page 113)
●
Formatter (see
Formatter on page 116)
●
Stapler (see
Stapler on page 117) and stapler power-supply (see Stapler power-supply
on page 123)
●
Right side fan (see
Right-side fan on page 128)
●
ECU (see
Engine control unit (ECU) on page 131)
2. Remove one screw (callout 1).
1
Figure 5-84 Removing the tray 1 solenoid
3. Lift the solenoid off of the device chassis.
166 Chapter 5 Removal and replacement ENWW