Restore the factory-set defaults
Restoring the factory-set defaults returns all of the printer and network settings to the factory defaults. It
will not reset the page count, or tray size. To restore the printer to the factory-default settings, follow these
steps.
CAUTION: Restoring the factory-set defaults returns all of the settings to the factory defaults, and it also
deletes any pages that are stored in the memory.
1. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the
Setup
icon to open the menu.
2. Scroll to and select the Service menu.
3. Scroll to and select Restore Defaults, and then touch OK.
The printer automatically restarts.
114 Chapter 9 Solve problems ENWW
To Next Page
Loading...